What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 27.06.2025 00:01
He then describes the function of a fuse.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Ethereum Governance Tokens Spike as SEC Backs ‘Innovation Exemption’ for DeFi Projects - Decrypt
Barnstars:
These are simplified answers to the original question, and does not change anything I wrote above.
2024–10–10[John johnson John Johnson ]
Inflation Expectations Decline; Labor Market Expectations Improve - Federal Reserve Bank of New York
It also is a device that limits the change in current flow.
Here is a simplified AC power diagram.
At least they know the answer if they wanted it.
"Can't Believe Virat Kohli Knew...": RCB's Celebrations Amid Stampede Row Heats Up - NDTV Sports
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Edit 2024–10.
The other is “what does a “fuse” do?”
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
He then asserts :
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
'The Life of Chuck' might leave you brushing away tears — or scratching your head - NPR
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This device then solves the entire problem.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
For this case there are devices called Metal oxide varistors (MOV).
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
what exactly is a ‘surge’ protector?
Can you write a letter to your first love without mentioning his/her name?
but this device (an Inductor) … impedes the rapid changes in the current.
These devices are installed between the “hot” and “neutral” and protective ground.
nine
Why is Taylor Swift re-recording her albums?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
But… the neutral is now “floating” because of the 1 ohm resistance.
I post the exact comment here.
It seems Mohan does not understand the difference between a comment and an Answer.
This is where this question deviates from being a 'generic' question, and becomes more specific.
Now when you have a certain ac resistance, then a current flows in a loop.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
In schematic diagrams this is the symbol for a fuse:
A circuit breaker is similar, but is resettable.
The MOV will conduct when the voltage exceeds 50% of line voltage.
First Sentence:
the problem then depends on "how fast does the fuse operate?".
He then describes Rainy Season and Lightning.
This is where the MOV conducts again, and dissipated the energy.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
One is “what exactly is in a ‘surge protector’ ? ”
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Because the load is inductive, the current lags the voltage.(by a bit).
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
An AC voltage/ current source, and an ac inductive load.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
A fuse is a non-resetable over current circuit protector.
This one hit behind the barn.
This is 'the assistant's answer'
There are two important concepts here.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
The third is lightning and “how it gets conducted into a home.”
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
a photo is worth a thousand words.
The bolt then partially travels down the line to your home.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
[old diagram got deleted by accident]
but I think this circuit , shows a few more pieces.
What does a fuse do?
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
One
[image of Common-mode choke]
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Upvotes:
eight
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
But it can get overloaded, and no longer works.
So, the voltage could go up to 500 volts, and the fuse will not open up.
2024–10–16 [ OO OLAOYE OYEBODE ]
At one ohm, the resistor has a maximum of 1 watt power.
There are three different concepts here that are getting confused.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
(Dc diagram shown, AC is similar).
so, what happens?
What is lightning?